Sony ECM-100N Omni-directional Electret Condenser Microphone
The Sony ECM-100N microphone comes equipped with a newly developed microphone capsule, the ECM-100U delivers flat and wide frequency response of 20 to 50,000 Hz and picks up the raw sound echoing in space.
Sony ECM-100N Condenser Mic Features:
Excellent Sound Quality
Newly developed small diaphragm microphone capsule with Omni-directional characteristics realizes clear and transparent sound in ambient and instrument recording.
Flat and Wide Frequency Response
The ECM-100N microphone has flat and wide frequency response (20 Hz to 50kHz) and provides superb sound reproduction quality for High-Resolution Audio.
Noise Elimination Construction
Two-part metallic body structure originally employed in the C-800G microphone prevents acoustic vibration resulting in low noise and clear sound.
Low-Cut Filter
Low-Cut filter switch helps eliminate low-frequency noise and proximity effect.
Pad Switch
An -10dB pad switch on the ECM-100N microphone provides added headroom and minimizes distortion caused by transient peaks.
Included Accessories for the Sony ECM-100N:
- Mic holder (1)
- Wind screen (1)
- Stand screw adaptor (W3/8 to NS5/8) (1)
- Operating instructions (1)
- Carrying case (1)
Specifications
Audio Section
- Capsule Type: Electret Condenser
- Frequency Response: 20 Hz to 50 kHz
- Directivity: Omni directional
- Sensitivity *[1]: -36 dB
- Output Impedance *[2]: 100Ω±15%, Balanced
- Dynamic Range: 124 dB or more
- Signal-to-Noise Ratio *[3]: 73 dB or more
- Inherent Noise *[4]: 21 dB SPL or less
- Maximum Input Sound Pressure Level *[5]: 145 dB SPL
General Section
- Connector: XLR-3-12C (male)
- Mic Cable: XLR 3-pin Cable Required (Not Supplied)
- Power Requirements: DC 44 to 52 V
- Dimensions *[6]: 19dia.×130mm (0.75dia.×5.12in.)
- Mass: Approx. 130g (4.6oz.)
- Supplied Accessories: Mic holder (1), Wind screen (1), Stand screw adaptor (W3/8 to NS5/8) (1), Operating instructions (1), Carrying case (1)