Unity Audio The Mini Rock Active Monitors (Pair)
Unity Audio launched their new Mini-Rock 2 way active monitor at the 2018 NAMM show. As the name implies, this new addition represents the smallest model in the company’s professional active monitor range to date measuring 279mm high, 184 mm wide, 256 mm deep, (10.98″ high x 7.24″ wide x 10.07″ deep).
Sealed Aperiodic Vent Cabinet Design
The cabinet is of course a sealed design like all the models in the Unity Audio range in order to accurately reproduce low frequencies with superior transient response and without any phase/timing anomalies associated with other designs. The Mini-Rock is also the first monitor in the range with the exception of the Avalanche sub-woofer that uses a split dual-chamber cabinet with Aperiodic Vent. This delivers all the benefits of a sealed cabinet such as zero port noise and tight fast accurate bass reproduction. It also significantly increases the bass response available from a smaller cabinet design.
Folded Jet 5 Ribbon Tweeter
The Mini-Rock shares the same 50kHz folded ribbon tweeter that is used in the larger Rock and Boulder models *
This high frequency driver enthrals with its lightning-fast response and wide dynamic range, offering minimal distortion, lots of headroom and a distinctly wider frequency range than conventional dome tweeters. The results are a transparent and effortless sound image which is non-fatiguing at any level and for long intense monitoring periods.
The JET tweeter was developed to perfection on the basis of the famous Air Motion Transformer by loudspeaker pioneer Dr. Oskar Heil. Its operating principle is based on a concertinaed-foil membrane, driven by a strong magnet system of neodymium rods. This motor drives the air considerably faster than the pistonic motion of a conventional driver, with gains in higher sensitivity and extraordinary dynamics. Due to many additional design changes, including special patented gluing and surface processes, improved new neodymium magnet system, even higher efficiency, higher sound pressure levels and frequency response up to 50 kHz was achieved.
The core of the JET tweeter is the folded foil membrane. With a fold width of only 0.84 mm, a major requirement in the JET production is precision. To guarantee repeated accuracy and unchanging quality even with high production capacity, gluing and handling are now executed by two SCARA robots. The folding and fixing of the membrane, however, are executed by hand, since for production steps requiring extreme precision, the manual dexterity of skilled technicians is irreplaceable. Due to continuous improvement, the JET 5 tweeter creates an effortless, airy and resonance-free image up to 50,000 Hz.
Crystal Membrane Woofer
A new crystal membrane woofer measuring 150mm ( 5¬æ” ) has been selected. This eye-catching surface of the crystal membrane is more than just an attractive design feature. The crystal-shaped inverse aluminium dome is joined to a paper cone in a special gluing process to result in the desired sandwich construction. The crystal cone aluminium-foil stamping stiffens the aluminium dome, diminishing resonances and minimising coloration, while improving power handling and dynamics. The voice coil design of the woofer results in an expanded frequency range, and driver surround allows for longer cone excursions for truly prodigious volume and lowest distortion, a unique engineering achievement for a driver of its size.
Input/Crossover
On the rear panel the Mini-Rock has a balanced XLR input connector and stepped volume control feeding a dedicated custom designed crossover stage. Using high quality expensive IC chips to ensure the audio signal path isn’t compromised the crossover is at 2.7kHz 4th order Linkwist-Riley design.
Amplification
The Mini-Rock uses two 180 watt Class D amplifiers one per drive unit which also includes DC protection. The Class D power supply provides switchable 115v-230v operation.
Specifications
- 50kHz Folded Ribbon Tweeter
- 5¾” / 150mm Crystal Membrane Woofer
- Sealed MDF Aperiodic Vent split cabinet design
- 2x 180 watt Class D amplifiers
- Cabinet side mounting points for OEM Yokes
- Rear panel mounting holes for Type 50 speaker brackets
- 256mm deep x 184mm wide x 279mm high
- 6.5Kg