DPA Microphones 3532-SP Stereo Mic Kit
The 3532-SP is a complete state-of-the-art A-B Stereo Kit with two 4041-SP microphones, carefully matched within ±0,5 dB on both frequency response and sensitivity in the microphone’s entire frequency bandwidth.
It is the ultimate choice for the demanding engineer and audio purist who emphasizes clarity, openness, precision, low self-noise and high sensitivity.
The kit is designed for a broad range of uses, mainly as main pair for classical, jazz and folk genres, grand pianos, guitars, overheads or close-miking drums, choirs, strings, wind instruments and much more. You get a bright and transparent sound quality with lots of headroom. With its soft boost, which is present on-axis, and gradually goes towards linearity off-axis, the 4041-SP omni microphone can be angled to use as a natural equalizer.
What’s in the box
- 2 x 4041-SP Large Diaphragm Microphone, P48, factory-matched
- 2 x DUA0021 Foam Windscreeen
- 1 x UA0836 Stereo Boom with Holders
- 1 x DYS0917 Thread Adapter for Stereo Boom
- 2 x UA0961 Microphone Holder
Specifications
Directional characteristics:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
24 mm (1 in) condenser w. stainless steel diaphragm
Frequency range, +/- 2 dB:
20 Hz – 20 kHz with 4 – 6 dB soft boost at 8 kHz
Equivalent noise level, A-weighted:
Max. 8 dB(A) re. 20 µPa
Equivalent noise level, ITU-R BS.468-4:
Max 20 dB
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL):
86 dB
Total Harmonic Distortion (THD):
<0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak
Dynamic range:
Typ. 118 dB
Max. SPL, peak before clipping:
134 dB
Output impedance:
<200 Ohm
Cable drive capability:
Up to 100 m (328 ft)
Power supply:
48 V Phantom power
Connector:
3-pin XLR-M (Standard P48)
Weight:
190 g (6.7 oz)
Capsule diameter:
24 mm (1 in)
Microphone length:
170 mm (6.69 in)
Matching tolerance (frequency response and sensitivity):
±0.5 dB (20 Hz – 20 kHz)
Phase deviation for kit:
< 5°