Focusrite ISA Two Dual Mono Mic Pre

Las exportaciones están exentas de IVA fuera de la UE o dentro de la UE para operadores intracomunitarios.
  •  
  •  
  •  
  •  
  •  

    The Focusrite ISA Two dual mono microphone preamplifier brings out your microphones inner character, which allows you to get the very best out of any microphone you care to experiment with.

      SKU: FOCUSISATWO Categorías: , , , Marca:

      Focusrite ISA Two Mic Pre

      You may only need a couple of mic preamps – but they should be the best.

      Variable input impedance

      We’ve made one little adjustment to the mic pre. The original ISA 110 had a single input impedance that was ideal for the mics of the time. We’ve added three more, allowing you to get the very best out of any microphone, vintage or modern. Give a vintage mic the input it expects to get a traditional, warm sound. Pair the ISA Two with modern microphones and get the most transparent sound imaginable. Or experiment and pull out the inner character of any microphone you care to try. Couple that with up to 80dB of gain and you can be ready for anything.

      Front panel instrument inputs

      In addition to the mic pres, there are front panel instrument inputs for instant access, along with rear-panel line ins. There’s also a balanced insert point on the rear panel, actuated with a front-panel button so you can insert the EQ, dynamics or other processors you need. Add to that the user-calibrated 8-LED metering and variable cutoff high-pass filter and you know that with the ISA Two you’ll have everything you need to get the highest quality sound into your recordings.

      Features

      Lundahl LL1538 mic input transformer

      Rupert Neve originally chose the Lundahl LL1538 to be the input transformer on the ISA 110. To this day the Lundahl transformer remains the best microphone input transformer available, and is used in every ISA Series mic pre. Rupert Neve also perfected the Zobel network found in the ISA circuit; something which takes a lot of knowledge and a golden set of ears.

      Up to 80 dB of gain

      ISA Two offers up to 80 dB of clean, distortion-free gain. The much heralded ISA topology also ensures low noise, even at the highest gain levels. The transformer alone supplies 20 dB of gain, while ISA’s input stage offers up to 60 dB in addition, giving an astonishing 80 dB of maximum gain on the microphone input.

      Variable input impedance

      Four choices of input impedance, including the original ISA 100 value, allow you to match the preamp to your microphone, even if it’s a vintage type, giving you the best possible sound. The impedance is selected using a switch on the front panel, and the impedance choice is remembered even once the unit is switched off and back on.

      User-calibrated metering

      Each channel has an eight-LED array to clearly display the level of your two signal. You can line up your analogue levels with your converters of DAW by using the calibration knob on the rear panel. You will be safe in the knowledge that you have avoided clipping on the way in.

      Front panel instrument and rear panel line inputs

      Two 1/4in. jack sockets on the front panel of ISA Two give you instant access to a transparent DI input. TRS line inputs are available on the rear panel too, and you can step through them instantly to select the one you want.

      Variable cut-off high-pass filter

      Built in, and easily accessed with its own large knob an illuminated button, is an extremely smooth sounding 18dB/octave high-pass filter of the same design as the original ISA 110 module. This is ideal for cutting out rumble, thumps and other unwanted low-frequency sounds and with a range of 16 to 420 Hz, it’s easy to lose what you don’t want, and keep what you do.

      Rear panel balanced inserts

      Each channel of ISA Two has its own balanced insert point. With 1/4in. TRS send and receive connections, your choice of signal processor can be connected and switched in and out using the illuminated switch on the front panel.

      Specifications

      Front panel (Per channel)

      • 1/4″ instrument input
      • Variable input impedance – Low, ISA 110, Medium, High
      • Input selection – Mic, Line, Instrument
      • 0 – 30 dB/30 – 60 dB gain switch
      • Phantom power switch
      • Phase invert switch
      • 0 – 60 dB gain in 10 dB steps
      • 0 – +20 dB continuously variable trim
      • Variable high-pass filter with on/off switch
      • Insert point on/off switch
      • Eight-LED user-calibrated level meters
      • Single power switch

      Rear panel (Per channel)

      • XLR-F mic inputs
      • 1/4″ TRS line inputs
      • 1/4″ TRS Sends
      • 1/4″ TRS Returns
      • XLR-M line output
      • Single peak meter calibration dial
      • Single IEC power socket

      Mándanos un mensaje

      Cerrar