Royer Labs R-122 MkII Phantom Powered Ribbon Mic Matched Pair

4.555,00 3.764,46+IVA

Las exportaciones están exentas de IVA fuera de la UE o dentro de la UE para operadores intracomunitarios.
  •  
  •  
  •  
  •  
  •  

    Royer broke new ground when they produced the Royer Labs R-122, an active version of the Royer R-121 which also offered an improved transient response by virtue of the larger transformer housed in the body. The first designer to appreciate the value of housing a preamplifier in the mic rather than sending low level signals to a control room mic preamp, David Royer led where countless imitators have followed. Needless to say, the Royer R-122 MKII Phantom powered Ribbon Mic remains the leader in the active ribbon field, admired and used by classical, jazz, rock and acoustic musicians, engineers and producers alike. These are just some of the reasons why the Royer R-122 MkII Phantom Powered Ribbon Mic Matched Pair is such a great addition to your studio mic cupboard!

      SKU: 6183MP Categorías: , , Marca:

      Royer R-122 MkII Phantom Powered Ribbon Mic Matched Pair

      “When you already make some of the best ribbon mics in the world, improving on them isn’t easy — but Royer have done just that.”

      The Royer R-122 MKll Phantom Powered Ribbon Microphone takes the R-122 to a whole new level, delivering unprecedented flexibility for ribbons via the addition of a switchable -15 dB pad and a switchable bass-cut filter. The switches are completely out of the circuit when disengaged so when both are off, the microphone is for all purposes an original Royer R-122. The switches are located on the back of the microphone and recessed to prevent accidental activation.

      Features

      • Phantom powered circuitry provides high output and impedance matching
      • High SPL Capabilities
      • No distortion up to maximum SPL rating
      • Extremely low residual noise
      • Ribbon element is not affected by heat or humidity
      • Absence of high frequency phase distortion
      • Equal sensitivity from front or back of element
      • Consistent frequency response regardless of distance
      • Rear side of mic records slightly brighter when three feet or closer to sound source

      Applications

      • Electric Guitar Amps
      • Acoustic Guitar
      • Drum Overheads
      • Percussion Instruments
      • Brass and Woodwinds
      • Horn Sections
      • Acoustic Piano
      • Acoustic Guitar
      • Harp
      • Solo Strings & String Sections
      • Choirs and Orchestras
      • Commercial Broadcast
      • Voice Over

      The Pad

      The Royer R-122 MKll’s switchable -15 dB pad is positioned before the microphone’s electronics and, when engaged, eliminates any potential for headroom-related distortion on even the loudest sound sources. Wide open electric guitars are no problem. With the pad in, the R-122 MKll’s output is actually 2 dB lower than our flagship Royer R-121.

      The Royer R-122 MKll’s well-designed pad has no sonic imprint. Once levels are matched, the R-122 MKll reproduces sound exactly the same with the pad in as with the pad out.

      The Bass Cut

      When switched in, the Royer R-122 MKll’s bass cut starts filtering at 100 Hz, 6 dB per octave, effectively reducing the mic’s bass buildup due to proximity effect. This smooth filter is extremely useful on vocals, many acoustic instruments, and close-miked electric guitars when less bottom end is desired.

      The R-122 MKll’s electronics are hand-wired in our Burbank, CA factory. The microphone utilizes a special Royer-designed toroidal transformer that delivers a faster transient response then traditional ribbons, making it a first call ribbon mic for drum overheads, percussion and all acoustic instruments.

      Gain

      Conventional ribbon microphones need high-quality, high-gain microphone preamplifiers to record softer sound sources. The Royer R-122 MKll’s output level is much higher, allowing you to use practically any mic preamplifier or board pre’s to record even the quietest sounds. The R-122 MKll contains a fully balanced, hand-wired, discrete head amplifier system utilizing a specially wound toroidal transformer and ultra-low noise FET’s. This system is extremely quiet and brings the Royer R-122 MKll’s sensitivity to 37 dB, all while allowing for high SPL recording! Go ahead and plug a MKll into any preamp with average gain – you’ll get full Royer performance and enough level to drive any recording medium.

      There is no increase in self-noise in the Royer R-122 MKll’s higher sensitivity. All of the mic’s additional output comes from its large, specially wound toroidal transformer – that wonderful thing called “free gain.” The phantom powered circuitry provides impedance conversion only, adding no noise of its own.

      Impedance Matching

      The Royer R-122 MKII’s active electronics put a perfect load on the ribbon element at all times, allowing the microphone to deliver its full sonic potential regardless of the input characteristics of the following pre. Due to its low-impedance output, R-122’s can be used on extremely long cable runs with minimal signal loss. In addition, the ribbon element can’t be damaged by phantom power, miswired cables or electrical glitches.

      Patented Offset Ribbon Technology

      The Royer R-122 MKII’s proprietary offset ribbon transducer (Patent # 6,434,252) positions the ribbon element closer to the front (logo) side of the microphone. This configuration gives the ribbon more room to move within the prime magnetic field while maintaining full frequency response during high SPL recordings. It’s an integral piece of the magic of all Royer R-series microphones.

      The R-122 MKll is every bit as tough as our R-121. It is a first-call mic for electric and acoustic guitars, drum overheads, brass, percussion, electric and acoustic bass, piano, strings, woodwinds, Foley, and many other applications.

      The R-122 MKll is similar to the R-121, but the faster transient response and larger size of the MKll’s audio transformer translates into more open highs and a tighter, more focused low end response. These characteristics make the R-122 MKll an exceptional choice for drum overheads, many acoustic instruments, percussion, strings, piano, standup bass and vocals.As with all Royer ribbons, pushing up the faders on your ribbon-recorded tracks at mixdown is a revelation. When your tracks sound natural and real, there’s nothing to fight or “fix” and instruments drop into the mix easily.

      Should I Use An R-122 MKll or R-121?

      Because of the R-122 MKll’s faster transient response and tighter low end, engineers often choose them over R-121’s for drum overheads, acoustic instruments and vocals. R-121’s sometimes edge out R-122 MKll’s on electric guitars and brass, but it’s a matter of taste. If you’re recording mostly electric guitars and/or brass, we usually suggest going with the R-121 – it’s less expensive and sounds incredible. The MKll is equally good on these instruments, but you may not need (or want) the additional openness in the highs from the faster transient response, and you certainly won’t need the MKll’s higher sensitivity on these high SPL applications. If you plan on using the mics primarily for drum overheads, vocals, piano, acoustic instruments, strings, classical music applications and so forth, we highly recommend going with the R-122 MKll, which will also be excellent on electric guitars, percussion and brass.

      Two Mics in One

      Recording

      The R-122 MKll is every bit as tough as our R-121. It is a first-call mic for electric and acoustic guitars, drum overheads, brass, percussion, electric and acoustic bass, piano, strings, woodwinds, Foley, and many other applications.The R-122 MKll is similar to the R-121, but the faster transient response and larger size of the MKll’s audio transformer translates into more open highs and a tighter, more focused low end response. These characteristics make the R-122 MKll an exceptional choice for drum overheads, many acoustic instruments, percussion, strings, piano, standup bass and vocals.As with all Royer ribbons, pushing up the faders on your ribbon-recorded tracks at mixdown is a revelation. When your tracks sound natural and real, there’s nothing to fight or “fix” and instruments drop into the mix easily.

      Should I Use An R-122 MKll or R-121?

      Because of the R-122 MKll’s faster transient response and tighter low end, engineers often choose them over R-121’s for drum overheads, acoustic instruments and vocals. R-121’s sometimes edge out R-122 MKll’s on electric guitars and brass, but it’s a matter of taste. If you’re recording mostly electric guitars and/or brass, we usually suggest going with the R-121 – it’s less expensive and sounds incredible. The MKll is equally good on these instruments, but you may not need (or want) the additional openness in the highs from the faster transient response, and you certainly won’t need the MKll’s higher sensitivity on these high SPL applications. If you plan on using the mics primarily for drum overheads, vocals, piano, acoustic instruments, strings, classical music applications and so forth, we highly recommend going with the R-122 MKll, which will also be excellent on electric guitars, percussion and brass.

      Two Mics in One

      Due to our patented offset ribbon transducer, the back of the R-122 MKll records slightly brighter than the front side at distances of three feet and closer. This can be extremely useful for recording acoustic guitars, vocals, drum overheads and other sound sources that you may want a slightly brighter response on.

      The Royer R-122 MKII Phantom Powered Ribbon Microphone is also available as a single unit.

      Specifications

      • Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics
      • Polar Pattern: Figure-8
      • Generating Element: 2.5-micron aluminum ribbon
      • Magnets: Rare Earth Neodymium
      • Frequency Response: 30 -15,000 Hz +/- 3dB
      • Sensitivity: -37 dB (referenced 1v/pa +/- 2dB)
      • Self-Noise: < 20 dB
      • Output Impedance: 200 Ohms, balanced
      • Rated Load Impedance: 1K-Ohm
      • Maximum SPL: >135dB
      • Output Connector: Male XLR 3 pin (Pin 2 Hot).
      • Dimensions: 206mm L X 25mm W (8 1/8″” L X 1″” W)
        Weight: 309 grams (10.9 oz)
      • Finish: Dull Satin Nickel/Matte Black Chrome optional.

      Mándanos un mensaje

      Cerrar