Microtech Gefell M 270 condenser microphone

Las exportaciones están exentas de IVA fuera de la UE o dentro de la UE para operadores intracomunitarios.
  •  
  •  
  •  
  •  
  •  

    Consultar Precio

    Compra desde la Unión Europea y le preocupan las tasas y los gastos adicionales?Descubre como puedes ahorrar con Funky Junk

    A Microtech Gefell SMS 2000 series microphone amplifier miniature omnidirectional condenser with detachable M 27 capsule.

      SKU: MCGFM270 Categorías: , , , Marca:

      Microtech Gefell M 270

      SMS 2000 comprises a microphone amplifier with interchangeable capsules for universal application in professional recording. These are supplied as the following main assemblies, with additional capsules as required: M200 (cardioid), M210 (hypercardioid), M270 (omnidirectional). This allows universal applications in professional recording and sound reinforcement.

      The amplifier is fitted with a 10 dB attenuator switch, and a low frequency roll-off switch to reduce proximity effect when close miking.

      The newly developed, transformerless circuit design substitutes the previous transformer for a symmetrical output stage. The pre-amplifier is distinguished by its remarkably low intrinsic noise and output capabilities.

      The module system adjusted to optimum reproduction properties allows a particularly clean and colourless sound reproduction.

      The direction of maximum sensitivity is axial. The studio microphone module system is equipped with a comprehensive range of accessories for widely varying methods of microphone mounting.

      It is possible to activate a 10 dB preattenuation for handling very high sound pressure levels. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect. The two switches are sunk into the middle of the microphone.

      The microphones are equipped with a standard 3-pin XLR connector fitting to a microphone cable, e.g. C 70. The operation voltage is provided by 48 V phantom powering according to the international standards DIN 45596 and IEC 268-15. The studio microphone system is available in a satin nickel or a black matt finish.

      M 27

      The pressure transducer M 27 (used in the M 270 microphone) with omnidirectional polar pattern is mainly intended for far-field applications. It is insensitive to structure-born noise and wind. The presence boost of 5 dB at 10 kHz is also a warranty for brilliant recordings coming from undefined directions.

      There is an optional knuckle-joint that can be attached between the body and microphone head to aid in directing the microphone (EG: the body can be hidden underneath a table with only tyhe head showing)..

      There is an optional knuckle-joint that can be attached between the body and microphone head to aid in directing the microphone (EG: the body can be hidden underneath a table with only tyhe head showing).

      Finish: satin nickel or matt black

      Supplied with Wooden Case

      Specifications

      • Polar Patterns: omni
      • Frequency Range: 40-20000Hz
      • Sensitivty at 1kHz: 10mV/Pa
      • Switch position “reduced bass roll-off” at 60 Hz: -15dN
      • Rated impedance: 150 ohms
      • Equivalent loudness level due to inherent noise: CCIR 468-4 – 26dB / DIN EN 60268-4 – 18dB-A
      • Signal-to-noise ratio: CCIR Weighted – 68dB / A-Weighted – 76dB
      • Max. SPL for THD ≤ 0.5%: 138dB(with 10dB preattenuation- 148dB)
      • Dynamic range: 120dB
      • Current consumption: 3mA
      • Output connector: XLR3M
      • Weight: 130g
      • Length: 170.4mm
      • Dimensions(L x Ø): 166 x 21 mm

      Mándanos un mensaje

      Cerrar

      Comprar desde Unión Europea

      Cerrar

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      For more advice on international purchasing with Funky Junk, speak to one of our friendly advisors or email us sales@funky-junk.com

      Based in the EU but concerned about import fees and added charges? We've got you covered. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers. Simply switch to the EU store and check-out with your local tax-rate applied. Funky Junk will ship your items from your nearest warehouse for faster delivery times and no cross-border charges. Simple!

      Benefits to shopping with Funky Junk:

      For example: You’d like to purchase VAT-free from the UK? No problem, select the store you want to purchase from, then at checkout pay your local tax-rate (based on you IP location). Funky Junk will then ship your items from your nearest warehouse with stock for faster delivery times and no added charges. Simple!

      For more advise on international purchasing and VAT-related questions you might have, speak to one of our friendly advisors or email

      Got a question? Contact us here: sales@funky-junk.com

      Cambia a una tienda de la Unión Europea