PMC IB2S Passive MonitorsĀ (Pair)
The IB2S is based on the hugely successful IB1S with one major change to the driver compliment. The addition of the PMC 75 large soft dome mid range unit increases the definition and clarity to the level of the larger monitors in the range with no increase in cabinet size. Since the launch of the IB2S it has featured worldwide with high profile clients such as Ronald Prent ā Galaxy, Kraftwerk ā Kling Klang, Teldex ā Berlin, JVC ā Japan and the list goes on. Its potent performance and unsurpassed definition across the audio spectrum make it the ideal reference monitor for any stereo or surround project.
Features
- PMC ATLā¢ (Advanced Transmission Line) with 2 sections
- 27mm Twin Chamber fabric Soft dome HF with high performance ferro-fluid cooling
- PMC 75mm Soft Dome mid range
- PMC 10ā / 250mm carbon fibre & Nomexā¢ piston driver
- Phenomenal bass response down to 25Hz
- Matching low profile centre channel (IB1SM-C)
- Matching SB100 subwoofer to complete a surround system
- Film filter option: HF Roll off 1.5dB, 3dB & Flat
- Custom speaker stands for optimising performance 840mm (33″) High
- Recommended amp power up to 500W
- Activation option with Bryston PowerPac 300ā¢ (IB2S-A)
Specifications
- Type:Ā Passive / Activated
- Useable freq response:Ā 25Hz-25kHz Peak SPL @ 1M: 116dB
- Sensitivity:Ā 89dB 1W 1m
- Recommended Amp power:Ā 120-500W
- Impedance:Ā 4 Ohm nominal
- Effective line length:Ā 2.4m 8ft
- Drive units:Ā LF 250mm PMC Carbon Fibre/Nomexā¢ piston driverMF 75mm PMC fabric domeHF 27mm fabric soft dome
- Crossover Frequency:Ā 380Hz & 3.8kHz
- Input connectors:Ā 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)
- Activated:Ā Powerpac 250ā¢ 250W/8Ohms
- Distortion
- full o/p Slew rate .60 micro ā¦seconds
- Power B width 1Hz to 100Hz
- Finish:Ā Neo Black
- Dimensions IB2S:H 740mm 29.1″W 330mm 13.0″D 465mm 18.3″
- Weight (each):Ā 41kg 90.2lbs
- Weight Activated:Ā 51.50kg 113.3lbs