Brainstorm DXD-16

10.485,90 8.595,00+TAV

Les exportations sont exonérées de TVA en dehors de la CEE ou à l'intérieur de la CEE pour les acheteurs possedant un numero de TVA valide.

Délai de livraison environ 7-10 jours.

  •  
  •  
  •  
  •  
  •  

    16 outs PTP Grandmaster with GPS, merged with a precision Reference Generator

      UGS : 7382 Catégories : , , Brand: Brand:

      Brainstorm DXD-16

      A PTP Grandmaster with GPS, merged with a precision Reference Generator

      Barinstorm’s DXD-16 can be either a PTP Grandmaster, slave or Boundary Clock. PTP (Precision Time Protocol), defined in IEEE 1588, has been broadly adopted by manufacturers as a network synchronizing standard, which means that the DXD-16 can work in a number of systems. PTP profiles supported by the DXD-16 include AES67 and SMPTE 2059.

      As a Boundary Clock, the DXD-16 can be a slave to a Grandmaster on one of its attached networks, synchronize its internal clocks to that Grandmaster, and distribute the same Grandmaster time in its role as PTP master to the remaining attached networks. Alternatively it can itself fulfill the function of Grandmaster and be PTP master on all attached networks.

      Four Gigabit Ethernet ports (RJ45) are available on the DXD-16. The different ports can be used independently or as primary and secondary pairs. Each network connector supports an electrically and logically independent network, with the DXD-16 acting as a PTP timing bridge. The DXD-16 is not a network switch, and for security reasons no information flows from any network port to any other.

      • PTP Grandmaster
      • 4 independant Ethernet ports
      • Can synchronize to a PTP network, a GPS clock or a legacy reference
      • 6 legacy reference generators
      • 16 universal outputs (WC, AES, VID SYNC, 10MHz)
      • 2 external reference inputs with failover for redundancy
      • Remote control via web browser
      • Multiple options: GPS receiver, OCXO, SDI

      Alarm and Remote
      GPIO inputs (3) and outputs (3) are included.
      All functions and settings can be monitored and altered via a web browser.

      DXD-16 SPECIFICATIONS
      PTP: 4 independant Gigabit Ethernet ports (RJ-45)
      Configurable as a Grandmaster, slave or Boundary clock
      Complies with IEEE-1588 V2
      Unicast / Multicast operation
      Ext GPS Receiver: DXD-16 can operate with an external GPS receiver. Inputs are provided for:

      • 10 MHz
      • 1 PPS
      • TOD serial messages (RS 232)
      Reference Generator: Generates simultaneously up to 6 different rates in any of these formats:

      • Word clock – rates from 32 to 384 KHz
      • AES – rates from 32 to 96 KHz
      • Video sync:
        • NTSC/PAL black burst
          • 525/29.97/30i
          • 625/23.98/24/25i
        • HD tri-level sync
          • 720/23.98/24/25/29.97/30/50/59.94/60P
          • 1080/25/29.97/30i
          • 1080/23.98/24/25/29.97/30sF
          • 1080/23.98/24/25/29.97/30/50/59.94/60p
      • 10MHz
      Universal Outputs: 16 outputs – in 6 different groups
      BNC – 75Ω
      Output signal: any of the generated legacy references
      Oscillators: TCXO: +/- 1ppm
      OCXO: +/-10ppb (option)
      External Sync Sources: Word clock
      AES
      Video sync (Black Burst or HD tri-level sync)
      10MHz
      GPS
      PTP
      Universal Inputs: 2 BNC input connectors w/ 75Ω termination switch
      Accepts the following input signals:

      • Word clock
      • AES
      • Video sync (Black Burst or HD tri-level sync)
      • 10 MHz
      Remote control: Web browser
      3 GPIO inputs (DB-25)
      Alarm: 3 GPIO outputs (DB-25)
      Battery backup: An on-board battery keeps the internal time-of-day clock running while power is off
      Presets: 10 presets can be programmed for quick recall
      Display: 2.4” TFT LCD – 240 x 320 resolution
      Power: AC: 100-240 VAC – Internal power supply with IEC inlet
      DC: 12 VDC @ 60A – 4 pin circular input connector for external DC power source
      Dual power sources with auto switch-over in case of failure for redundancy
      Dimensions: 19” x 1.75” x 8”
      GNSS/GPS Internal
      Receiver (option):
      The DXD-16 can be fitted with an Internal GNSS/GPS receiver.
      The option includes an SMA antenna input connector. An antenna is required (not included).
      SDI Input (option): Option card with SDI Input and Loop BNC connectors (50Ω)
      Allows the DXD-16 to lock to external SDI signal

      Contactez-nous

      Fermer