DPA Microphones 4099S Clip Mic For Saxophone
- Superior gain-before-feedback
- Wireless compatible
- Flexible and easy one-hand mounting
- Holder gentle to the instrument
Soprano, alto, tenor or baritone, the 4099S fits them all, providing exceptional gain-before-feedback and a broad spectrum of uncompromised tonal possibilities depending on the microphone placement.
The 4099S is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The 4099 microphone and mounting system is meticulously designed and optimized for the saxophone family. This is to ensure the best possible mount and audio reinforcement is achieved when performing live.
Representing years of research and development, the 4099 condenser microphones feature supercardioid polar patterns for superior gain-before-feedback. Fully capable of handling any saxophone’s dynamic range and fine-grained timbre, these microphones live up to their pedigree with sound as accurate as DPA’s other world-class microphones.
Despite its tiny, discreet sizea and elegant, lightweight design, 4099S is extremely rugged. The versatile gooseneck provides stable and repeatable positioning. The mics can be easily unclipped and repositioned or moved to another instrument with only one hand, while the mounting system is designed never to mar or scratch the finish of your instrument.
Through the use of our extensive adapter system, the 4099 is compatible with virtually any wireless system and can also be used as a standard 48V phantom powered microphone via the included XLR connector.
With its very flexible design for a wide variety of mounting and positioning possibilities along with its extremely natural sound, the 4099 is truly a musician’s mic without equal. Continuing DPA’s heritage of sonic excellence, this series of microphones achieves the purest reproduction of your instrument and therefore your full range of expression.
Adapters for wireless microphones
A wide range of connection adapters makes it possible to use DPA miniature microphones with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.
DPA has specific adapters for AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice, Lectrosonics, Micron, Mipro, Pastega, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa, Vega and other systems. Each adapter for your cordless microphone is guaranteed to perfectly mate to your system of choice.
Specifications
Directional characteristics:
Supercardioid
Principle of operation:
Pressure gradient
Cartridge type:
Pre-polarized condenser
Frequency range:
20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance:
80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz, Second order low-cut filter at 80 Hz with DAD4099
Sensitivity, nominal, ±3 dB:
6 mV/Pa; -44.5 dB re. 1 V/Pa
Equivalent noise level A-weighted:
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
71 dB
Total harmonic distortion:
Dynamic range:
100 dB
Max. SPL, peak before clipping:
142 dB
Output impedance:
From MicroDot: 30 to 40 ohm, from DAD4099: 100 ohm
Cable drive capability:
300 m (984 ft) with DAD4099
Output balance principle:
Signal balanced with DAD4099 XLR adapter
Common Mode Rejection Ratio (CMRR):
> 60 dB at 50 Hz to 15 kHz with DAD4099 XLR adapter
Power supply:
Min. 5 V – max. 50 V through DPA adapter for wireless systems; 48 V phantom power ±4 V with DAD4099 XLR adapter
Current consumption:
1.5 mA; 3.5 mA with DAD4099 XLR adapter
Connector:
MicroDot
Color:
Black
Weight:
31 g (1.1 oz)
Capsule diameter:
5.4 mm (0.2 in)
Microphone length:
45 mm (1.8 in)
Cable length:
1.8 m (6 ft)
Polarity:
Positively increasing sound pressure produces positive going voltage at MicroDot pin (and pin 2 on DAD4099 XLR adapter)
Operating temperature range:
-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity:
Up to 90 %
Gooseneck, length:
140 mm (5.5 in)