Millennia HV-3D-8

Les exportations sont exonérées de TVA en dehors de la CEE ou à l'intérieur de la CEE pour les acheteurs possedant un numero de TVA valide.
  •  
  •  
  •  
  •  
  •  

    Eight-channel ultra-pure microphone preamplifier

      Millennia HV-3D-8

      This might be music’s purest preamp. It’s no wonder the iconic “HV-3” first dazzled engineers who worked with classical and acoustic music, where each and every single detail matters. But, more and more engineers from all genres have discovered the magic of the HV-3’s musically transparent circuitry. The fact is, you can never “undo” the color your microphone preamplifier adds. In contrast to preamps that lay on lots of color, the Millennia HV-3 is meticulously crafted to give you the full, authentic voice of your microphone. That way, you’re not committed from the start, and you can easily sculpt your sound later with the exact character you want. Hear the detail today with the Millennia HV-3D-8.

      EIGHT REASONABLY PRICED CHANNELS OF HV-3 MAGIC

      Representing the best per-channel deal for the iconic HV-3, the HV-3D-8 gives you eight of the original HV-3 preamps in one compact rackmount unit. It’s no surprise that the HV-3D-8 is Millennia’s best seller.

      PURE, MUSICAL, INCREDIBLY SMOOTH PREAMPLIFIER

      The HV-3 is there, but it’s not there. And that’s exactly how you want it. Built to offer the most transparent path from your microphone to the rest of your signal chain, the HV-3 features a transformerless input, balanced audio path, and minimal amplifier design. Aficionados of classical and acoustic-based music may have first discovered the promise of the HV-3’s honest approach to preamplification, but the preamp is rapidly making its way into studios of all genres. Once you’ve heard it, you’ll realize that no color is a color, too. What you give the HV-3, you get.

      PRESERVES YOUR SOUND FOR LATER PROCESSING

      Much of our gear is soaked with character and personality. It’s easy to overdo it. The Millennia HV-3 is ideal for the engineer who wants to try on color, without committing to one sound from the start. When you’ve recorded with the HV-3, you know you’re starting from square one, so you can precisely dial in the tone, flavor, and character you want from your outboard gear or plug-in processors. To put it another way, if you were deciding what sculpture to make, you’d most likely want to start with an unchiseled piece of stone. The HV-3 translates the sound of the performance and the voice of your microphone, without getting in the way.

      KNOWN TO SAVE YOU TIME WITH EQ

      When you’re used to processing colored audio from the start, working with an HV-3 preamplifier will be a change. But, it’s an easy workflow to get into. In particular, engineers who have used the HV-3 often note that tracks are somehow easier to EQ. With the right mic, in the right place, the HV-3 delivers a smooth, natural response that seems to require less tinkering. Without the heavy hand of a preamp, tracks seem to fall together into place.

      MILLENNIA GEAR IS MADE FOR DETAIL

      Founder and chief designer John LaGrou takes the same approach to his exceptional audio gear as he does to the wine he cultivates in the California countryside. Detail matters, it’s everything. Whether in a vintage of wine or your multi-track mix, taken together, those details can make a major difference in the end result. Millennia equipment celebrates those fine, subtle points, bringing you gear that’s built with uncompromising quality to deliver purity in music.

      Specifications

      Minimum Gain 8.5 dB
      Maximum Gain (1.5 dB per step, 36 steps) 65 dB (up to 75 dB on request)
      Frequency Response (+0 / -3 dB) sub 3 Hz to beyond 300 kHz
      Noise (60 dB Gain, 10 Hz – 30 kHz, Inputs common) -133 dB EIN
      Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz – 20 kHz bandwidth, +27 dBu Out) < .001%, Typ. < .0005% (< 5 ppm)
      Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out < .0009%
      Phase Response (35 dB Gain, 50 Hz – 20 kHz bandwidth, +27 dBu Out) < 2 degrees deviation
      Common Mode Rejection Ratio (35 dB Gain, 10 Hz – 20 kHz bandwidth, 100 mV C.M.) > 65 dB, Typ > 85 dB
      Slew Rate (35 dB Gain, +27 dBu Out) > 25 Volts per microsecond
      Maximum Input Level (20 Hz – 40 kHz) +23 dBu (no attenuator pads required)
      Maximum Output Level (20 Hz – 40 kHz) +32 dBu
      Phantom Input Impedance (1 kHz) 6,750 ohms
      Output Impedance 24.3 Ohms (x2)
      DPA (B&K) Mic Powering +130 V dc max, (non-phantom)
      Phantom Powering +48 V dc, +/- 2 V dc
      Power Consumption 45 watts maximum
      Power Requirements 100V to 240V, 50/60 Hz
      Dimensions/Shipping Weight 19” W x 3.5” H x 12.5” D, 23 lbs.

      Contactez-nous

      Fermer

      Buy within EU

      Fermer

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      For more advice on international purchasing with Funky Junk, speak to one of our friendly advisors or email us sales@funky-junk.com

      Based in the EU but concerned about import fees and added charges? We've got you covered. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers. Simply switch to the EU store and check-out with your local tax-rate applied. Funky Junk will ship your items from your nearest warehouse for faster delivery times and no cross-border charges. Simple!

      Benefits to shopping with Funky Junk:

      For example: You’d like to purchase VAT-free from the UK? No problem, select the store you want to purchase from, then at checkout pay your local tax-rate (based on you IP location). Funky Junk will then ship your items from your nearest warehouse with stock for faster delivery times and no added charges. Simple!

      For more advise on international purchasing and VAT-related questions you might have, speak to one of our friendly advisors or email

      Got a question? Contact us here: sales@funky-junk.com