Microtech Gefell M 1030 Studio Condenser Microphone

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.
  •  
  •  
  •  
  •  
  •  
    The FET Microtech Gefell M 1030 Cardioid, large profile, condenser microphone with extended dynamic range and a very low noise floor of just 7dBA. Advanced circuit design, transformerless output and with an internal elastic suspension for the capsule, includes "read" LED.
      SKU: MCGFM1030114 Categories: , , , Brand: Brand:

      Microtech Gefell M1030

      The studio condenser microphone Microtech Gefell M 1030 combines modern large diaphragm capsule technology with the latest in semiconductor circuit topology. The size of the microphone housing is optimized with regard to the expectations of a large diaphragm microphone for studio applications.

      The microphone is specifically designed to meet the needs of professional and semi-professional users whodemand the highest performance. The microphones are ideally suited for universal miking applications in broadcast and sound studios. Applications include vocalists, announcers, dialog pickup and as spot microphones forrecording guitars, keyboard, percussion, wind and string instruments.

      The pick-up pattern is perpendicular to the direction of the microphone axis (side addressed). The model number and pick-up pattern symbol mark the front of the microphone. The green lightemittingdiode (LED) inside the protection grid operates as optical ready indicator.

      The condenser capsule exhibits a smooth frequency response with a slight presence boost in the 8 to 14 kHz range. The polar response exhibits an exceptionally high degree of rejection for sounds impinging from the rear (cardioid) or sides (super-cardioid) of the microphone. The electronic impedance converter uses a newly perfected circuit topology. This design reduces the noise floor to an extremely low level while also raising the maximum output capability. As a result, this microphone have a clean, distortion free sound over an extremely wide dynamic range. RFI susceptibility is very low.M_1030_EA92_kl

      The microphone capsule and electronics are elastically suspended inside the compact metalhousing. This reduces the sensitivity to mechanical impact and structure born noise.

      The microphone stand holder MH 93.1 can be exchanged for an elastic suspension EA 92 with the adaptor A 93 to further attenuate noise in extreme situations. The M 1030 connect to the microphone cable with a standard 3-pin XLR plug. Powering must be provided by an external 48 V phantom supply according to DIN 45596 and IEC 268-15.

      The microphone is finished in satin nickel and either comes as standard (with MH93.2 stand clamp and wooden box) or as part of the M 1030 set ( with EA93 elastic suspension and wooden box). Please see options for edition pricing.

      Specifications

      • Polar pattern: cardioid
      • Acoustic operating principle: Pressure gradient transducer
      • Dual Capsule: large diaphragm
      • Frequency range: 40…20000 Hz
      • Sensitivity at 1 kHz: 21 mV/Pa
      • Output impedance: 100 ohms
      • Noise level CCIR 468 – 4: 13 dB
      • Noise level DIN EN 60651: 7 dB – A
      • Signal-to-noise ratio (A-weighted): 87 dB
      • Max. SPL for K < 0.5%: 142dB
      • Dynamic range: 135 dB
      • Current consumption: 3.6 mA
      • Output connector: 3-pin XLR, goldplated contacts
      • Weight: 355 g
      • Dimensions ( L x ∅): 145 mm x 66 mm
      • Finish: satin matt

      Contact Us

      Close