Microtech Gefell MT 71 S Microphone

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.
  •  
  •  
  •  
  •  
  •  
    The Microtech Gefell MT 71 S microphone is a cardioid only large diaphragm condenser with the legendary M7 capsule.
      SKU: MCGFUMT71S Categories: , , , Brand: Brand:

      Microtech Gefell MT 71 S

      The legendary Georg Neumann M7 large membrane capsule gives this microphone its reputation for its legendary “presence”, exhibiting a smooth boost reaching its peak of about 4dB in the 7kHz region, coupled with a subtle roll-off at low frequencies. Delivering an outstanding performance with high sensitivity and excellent signal-to-noise ratio, the MT 71S is well suited to instrumental and vocals for broadcast and music production. The MT 71S has a Cardioid polar pattern. The transformerless circuit design with its symmetrical output stage yields superb transient response combined with high RFI rejection. Fitted with a 10 dB attenuator switch, and a low frequency roll-off switch to reduce proximity effect when close miking.

      The MT 71 S is supplied without mount as there is a wide choice of mounts and suspensions, please order the one most suitable for your requirements when you order the microphone.

      Microtech Gefell MT 71 S

      • Polar Patterns: cardioid
      • Acoustical Operating Principle: Pressure gradient transducer
      • Frequency Range: 40-18000Hz
      • Switch Position “reduced bass roll-off” at 90Hz: -10dB ¬±1dB
      • Sensitivty: 13mV/Pa ¬±3dB
      • Rated impedance: 150 ohms
      • Equivalent loudness level due to inherent noise: CCIR 468-4 (qps) – 22dB / DIN EN 60 651 – 14dB-A
      • Equivalent loudness level due to inherent noise: CCIR-weighted – 72dB / A-weighted – 80dB
      • Max. SPL for THD < 0,5%: 134dB

      ≤

      • Max. SPL for THD < 0,5%w/ 10dB preattenuation: 144dB
      • Total dynamic range of the microphone preamplifier 120dB
      • Current consumption 3mA
      • Output connector 3-pin connector, goldplated contacts
      • Weight: 285g
      • Dimensions (L x Ø): 217mm x 42/21 mm
      • Finish: satin nickel, black matt

      Contact Us

      Close