Schoeps V4Ub Studio Vocal Condenser Mic

2.440,00 2.000,00+IVA

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.

Delivery time is about 7-10 days.

Free shipping included!

  •  
  •  
  •  
  •  
  •  
    Gorgeous vintage designs combines superb characteristics into an outstanding vocal condenser microphone, the Schoeps V4 U.
      SKU: SCHV4UB Categories: , , , , Brand: Brand:

      Schoeps V4 U Vocal Condenser Mic

      • Studio Vocal Microphone
      • New small-diaphragm capsule architecture, with bevelled collar for controlling the polar response.
      • Warm, clear sonic character with smoothly rolled-off diffuse-field response.
      • Capsule head with adjustable tilt angle.
      • Optimal on-axis frequency response featuring a mild high-frequency lift.
      • Very smooth polar response; carefully-controlled narrowing of the pattern at high frequencies.
      • Diffuse-field response parallel to the 0 ° response, with a gentle roll-off at high frequencies.
      • Newly designed electronics offer a very high maximum sound pressure level.

      The V4 U is the studio vocal microphone by SCHOEPS.

      It unites the outstanding technical characteristics typical of SCHOEPS with a timeless, classic design.

      The “look” of the V4 U is based on the SCHOEPS CM 51/3 from 1951. But the V4 U is a thoroughly modern studio microphone. Its capsule, circuitry and mechanical construction are the result of extensive new development.

      The Capsule of the Schoeps V4 U

      • A 33-mm beveled collar causes the capsule’s directivity to increase steadily and smoothly at high frequencies, as in a largediaphragm microphone.
      • Meanwhile, the superior acoustic qualities of a small-diaphragm capsule like the extraordinarily smooth frequency and polar response are maintained.
      • The capsule is elastically suspended internally to reduce solid-borne sound such as handling noise.

      The Electronics of the Schoeps V4 U

      • Newly-developed bridge-type balanced output circuit.
      • Maximum sound pressure level of 144 dB SPL, corresponding to an output level of 4.8 V.
      • Output stage transformerless and free of coupling capacitors.
      • The resulting output impedance is low and constant with frequency, while the symmetry is very high.
      • Symmetrical, balanced output, the entire audio circuit is symmetrical from the output of the FET onward.
      • High immunity to interference, with gapless shielding and a modern RFI filter at the output; very good electromagnetic compatibility.

      Specifications

      • Directional pattern_x0009_Cardioid/li>
      • Frequency range_x0009_50 Hz – 22 kHz
      • Sensitivity_x0009_16 mV/Pa
      • Equivalent noise level (A-weighted)_x0009_15 dB-A
      • Equivalent noise level (CCIR)_x0009_25 dB
      • Signal-to-noise ratio (A-weighted)_x0009_79 dB-A
      • Maximum sound pressure level at 0.5% THD_x0009_144 dB-SPL
      • Maximum output voltage_x0009_4.8 V
      • Low-cut frequency_x0009_40 Hz
      • Powering voltage_x0009_48 V
      • Current consumption_x0009_3.3 mA
      • Length_x0009_194 mm
      • Weight_x0009_302 g
      • Diameter (cylinder)_x0009_34 mm
      • Width of the capsule head_x0009_45 mm
      • Head swivel degree span_x0009_+/- 20 °

      Contact Us

      Close