DPA Microphones 4011A Cardioid Mic

1.739,00 1.425,41+IVA

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.

Delivery time is about 7-10 days.

  •  
  •  
  •  
  •  
  •  
    DPA Microphones 4011A Cardioid Microphone is an upgraded version of the classic DPA 4011

      DPA Microphones 4011A Cardioid Mic

      • very low distortion
      • handles incredibly high sound pressure levels
      • totally faithful reproduction of the original sound

      The 4011-TL cardioid microphone is an upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic.

      State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion. The first order cardioid pick-up pattern gives superb separation between sound sources while spot-miking on every kind of live music.

      The mic is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals. It can handle incredibly high sound levels and even includes a 20 dB pad switch to attenuate the output of the microphone.

      A flat on axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pick-up.

      The feeling of being there will always be more intense with the 4011-TL than with any other cardioid.

      Holder and windscreen are included.

      Specifications

      Directional characteristics:

      Cardioid

      Principle of operation:

      Pressure gradient

      Cartridge type:

      19 mm (0.75 in) pre-polarised condenser

      Frequency range, ± 2 dB:

      40 Hz – 20 kHz

      Sensitivity, nominal, ±2 dB:

      10 mV/Pa; -40 dB re. 1 V/Pa

      Equivalent noise level A-weighted:

      Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))

      Equiv. noise level ITU-R BS.468-4:

      Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)

      S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):

      75 dB(A)

      Total harmonic distortion (THD):

      < 0.5% up to 110 dB SPL peak,

      Dynamic range:

      Typ. 97 dB

      Max. SPL, peak before clipping:

      158 dB

      Attenuators, filters etc.:

      0 dB, -20 dB

      Output impedance:

      < 200 ohm

      Cable drive capability:

      Up to 100 m (328 ft)

      Power supply:

      48 V Phantom power

      Current consumption:

      2.60 mA

      Connector:

      3-pin XLR-M (Standard P48)

      Weight:

      165 g (5.82 oz)

      Capsule diameter:

      19 mm (0.75)

      Length:

      175 mm (6.89 in)

      Operating temperature range:

      -40 to +55°C (-40 to 131°F)

      Contact Us

      Close