Millennia Media HV3C – Stereo Mic Pre-Amp
Digital workstations offer unlimited tracks, total creative freedom. But even advanced plug-ins can’t “uncolor” sound, can’t restore lost upper harmonic partials or the ambience that contained the living moment of performance. The HV- 3C is designed to transmit microphone signals to recording devices unaltered, not to impose a “signature” on basic tracks. Starting with an open, transparent signal puts you on the path to creative exploration. No matter how subtle or attractive, a colored “tweaked” signal destroys options at every link in the chain.
The HV-3C was developed to meet the need for a mic pre accurate enough for the world’s finest classical soloists and ensembles. Textbook theory remains incomplete.
Test instrument readings don’t reliably measure the quality of the listening experience. Millennia took a rigorously empirical approach, exploring many design approaches by attempting to perfect each one. Experimental designs were evaluated on the lab bench and in their own production facility, where they could compare recordings directly to live performances. They proved to ourselves that there’s no such thing as a straight wire with gain. But the HV-3C’s transformerless input, balanced audio path, minimal amplifier design has brought them closer than any other to their goal of absolute accuracy and uncompromised sonic realism.
Today, over 20,000 channels are performing in symphonic halls, stadium concerts and studios of all sizes and shapes. Whatever the venue or musical style, the HV-3C delivers the authentic sound of vocalists, acoustic instruments, drums, triple guitar stacks… delighting artists, engineers, producers and listeners around the world.
Authentic Transparency for Unrestricted Creativity
- Unsurpassed ambience retrieval
- Transformerless design with matched hi-speed discrete transistor octet has 23 dB input headroom: no attenuator “pads” needed
- Uncolored timbral accuracy at all dynamic levels
- Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
- Effortless, vividly realistic, musical performance
- Laser-trimmed FET-based output stage has 32 dB headroom: drives 1000 foot (300 m) cable runs with ease
- Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
- Ultra-clean toroid power supply
- Gold audio connectors and switches
- Mogami Neglex OFC audio wiring
- Silver Teflon power wiring
- Welded 16 gauge steel rack chassis
Options
- 24-bit 192 kHz A/D “POW-R” converters (available summer 2006)
- DPA (B&K) +130 V mic inputs
- DC inputs for ideal performance with dynamic and ribbon microphones
Specifications
- Minimum Gain : 8.5 dB
- Maximum Gain (1.5 dB per step, 36 steps) : 65 dB (up to 75 dB on request)
- Frequency Response +0 / -3 dB : sub 3 Hz to beyond 300 kHz
- Noise 60 dB Gain, 10 Hz – 30 kHz, Inputs common: -133 dB EIN
- Total Harmonic Distortion + Noise 35 dB Gain, 10 Hz – 20 kHz bandwidth, +27 dBu Out : < .001%, Typ. < .0005% (< 5 ppm)
- Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out : < .0009%
- Phase Response 35 dB Gain, 50 Hz – 20 kHz bandwidth, +27 dBu Out : < 2 degrees deviation
- Common Mode Rejection Ratio 35 dB Gain, 10 Hz – 20 kHz bandwidth, 100 mV C.M. : > 65 dB, Typ > 85 dB
- Slew Rate 35 dB Gain, +27 dBu Out : > 25 Volts per microsecond
- Maximum Input Level 20 Hz – 40 kHz : +23 dBu (no attenuator pads required)
- Maximum Output Level 20 Hz – 40 kHz : +32 dBu
- Phantom Input Impedance 1 kHz : 6,750 ohms
- Output Impedance : 24.3 Ohms (x2)
- DPA (B&K) Mic Powering : +130 V dc max, (non-phantom)
- Phantom Powering : +48 V dc, +/- 2 V dc
- Power Consumption : 12 watts maximum
- Power Requirements : Selectable: 100-120, 200-240 V ac, 50/60 Hz
- Dimensions/Shipping Weight : 19” W x 1.75” H x 12” D, 15 lbs..