Schoeps MK2H Omni Mic Capsule

766,00 633,06+IVA

As exportações estão isentas de IVA fora da UE ou dentro da UE para compradores intracomunitários.
  •  
  •  
  •  
  •  
  •  

    Schoeps MK2H Omnidirectional Microphone Capsule often used for recording classical performances

      REF: SCHMK2H Categorias: , , , Marca:

      Schoeps MK2H Omni Mic Capsule

      Features

      • omnidirectional pattern
      • mild high-frequency rise to compensate for losses at medium recording distance
      • often chosen for “spaced microphone” stereo pickup and “Decca Tree” arrangements

      If this microphone capsule is used indoors at medium recording distances (i.e. where direct sound energy is similar in amount to reflected sound energy), its overall response will be linear. Its extended frequency response and low noise make it appropriate for the most demanding applications.

      The sound inlet of the MK 2H is narrower than that of our other pressure transducers, causing a slight, purely acoustic response elevation above 6 kHz. This reduces the high frequency loss for diffuse sound, thus helping to preserve natural sound quality.

      • Although our normal production tolerances are very close, we can deliver specially matched capsule pairs for a small extra charge.

      Application

      The MK 2H, like the MK 2S, is ideal for natural-sounding pickup of instruments and orchestras in spaces with well balanced reverberance. The choice between the two capsule types is essentially a matter of personal preference. At a given miking distance the MK 2H might be described as more ”balanced and round” sounding while the MK 2S would give a slight additional brilliance. However, one might also choose the MK 2H for slightly closer placement or the MK 2S for slightly more distant placement – and then these two capsule types would have very similar sound quality, with the main difference being the balance of direct to reverberant sound which is picked up.

      For spaced microphone (“A/B”) stereo recording and especially the “Decca Tree” method, KA 40 accessory spheres are recommended.

      Specifications

      • Frequency range20 Hz – 20 kHz
      • Sensitivity15 mV/Pa
      • Equivalent noise level (A-weighted)11 dB-A
      • Equivalent noise level (CCIR)23 dB
      • Signal-to-noise ratio (A-weighted)83 dB-A
      • Maximum sound pressure level at 0.5% THD130 dB-SPL
      • Length22 mm
      • Diameter20 mm
      • Weight17 g
      • Surface finishmatte grey (g) or nickel (ni)

      Contacte-nos

      Fechar