Royer Labs R-122 MkII Phantom Powered Ribbon Mic

2.190,00 1.809,92+IVA

As exportações estão isentas de IVA fora da UE ou dentro da UE para compradores intracomunitários.
  •  
  •  
  •  
  •  
  •  

    Royer broke new ground when they produced the Royer Labs R-122, an active version of the Royer R-121 which also offered an improved transient response by virtue of the larger transformer housed in the body.

      REF: 6183 Categorias: , , Marca:

      Royer R-122 MkII Phantom Powered Ribbon Mic

      “When you already make some of the best ribbon mics in the world, improving on them isn’t easy — but Royer have done just that.”

      The Royer R-122 MKll Phantom Powered Ribbon Microphone takes the R-122 to a whole new level, delivering unprecedented flexibility for ribbons via the addition of a switchable -15 dB pad and a switchable bass-cut filter. The switches are completely out of the circuit when disengaged so when both are off, the microphone is for all purposes an original Royer R-122. The switches are located on the back of the microphone and recessed to prevent accidental activation.

      Features

      • Phantom powered circuitry provides high output and impedance matching
      • High SPL Capabilities
      • No distortion up to maximum SPL rating
      • Extremely low residual noise
      • Ribbon element is not affected by heat or humidity
      • Absence of high frequency phase distortion
      • Equal sensitivity from front or back of element
      • Consistent frequency response regardless of distance
      • Rear side of mic records slightly brighter when three feet or closer to sound source

      Applications

      • Electric Guitar Amps
      • Acoustic Guitar
      • Drum Overheads
      • Percussion Instruments
      • Brass and Woodwinds
      • Horn Sections
      • Acoustic Piano
      • Acoustic Guitar
      • Harp
      • Solo Strings & String Sections
      • Choirs and Orchestras
      • Commercial Broadcast
      • Voice Over

      The Royer R-122 MKII Phantom Powered Ribbon Microphone is also available as a matched pair.

      Specifications

      • Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics
      • Polar Pattern: Figure-8
      • Generating Element: 2.5-micron aluminum ribbon
      • Magnets: Rare Earth Neodymium
      • Frequency Response: 30 -15,000 Hz +/- 3dB
      • Sensitivity: -37 dB (referenced 1v/pa +/- 2dB)
      • Self-Noise: < 20 dB
      • Output Impedance: 200 Ohms, balanced
      • Rated Load Impedance: 1K-Ohm
      • Maximum SPL: >135dB
      • Output Connector: Male XLR 3 pin (Pin 2 Hot).
      • Dimensions: 206mm L X 25mm W (8 1/8″” L X 1″” W)
        Weight: 309 grams (10.9 oz)
      • Finish: Dull Satin Nickel/Matte Black Chrome optional.

      Contacte-nos

      Fechar

      ×
      No results found