ATC SCM20 ASL PRO MKII
Overview of the ATC SCM20ASL Pro V2
- 25mm soft dome HF unit.
- Full “SL” spec ATC bass driver with integral 75mm soft dome.
- 9kg precision machined and optimised motor assembly.
- LF contour control
- On board ATC built two way 250W Bi-Amp Pack
- Heavily damped Aluminium cabinet
- 6 year ATC warranty
- User’s Guide here.
Drivers: LF 6”/150mm Super Linear, HF 1”/25mm Dual-Suspension ‘S-Spec’ Tweeter
Amplitude linearity : 80Hz – 20kHz (+/-2dB)
Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)
Dispersion : +/-80° coherent horizontal, +/-10° coherent vertical
Maximum continuous : SPL 108dB (per pair @ 1m)
Audio input : Rear panel mounted female XLR (pin 2 +ve)
Input sensitivity : 1V/2V RMS or +2.2/+8.2dBu via switch (ref. bass full output)
Input sensitivity trim : 0dB to -6dB (via rear panel pot)
Total input sensitivity range : 1V/+2.2dBu to 4V/+14.2dBu
Input impedance : 10kΩ per leg
Amplifier output power : Bass 200W continuous, HF 50W continuous (1%THD)
Crossover frequency : 2.1kHz
Crossover filters : 2nd order/ 12dB/oct critically damped with phase compensation
Low frequency shelf cut/boost : 80Hz, -2dB to +3dB in 1dB steps (via rear panel rotary switch)
Overload protection : Active FET momentary gain reduction (inc. front panel mounted ‘limit’ LED)
Amplifier thermal trip circuit
Cabinet Dimensions (HxWxD) : 450x250x392mm (17.7″x8.8″x15.4″)
Weight : 28kg/61.6lbs (per cabinet)
Request a quote below: