BeesNeez Elly FET Condenser Microphone
In the design phase of the Elly, a few deciding factors were addressed, namely: portability, self-noise, and sibilance. The end result is a phantom-powered transformer balanced fet microphone that is optimised to work seamlessly with our BeesNeez K7 Capsule. The Studio Series Elly and the Producer Series Elly both feature identical circuitry. However, the Studio Series Elly comes in our one-piece solid brass body grille, allowing a savings in cost that we pass on to you.
The BeesNeez Elly Fet is a large diaphragm fet condenser microphone that has a rich and warm rounded tone that will work in many applications, but is optimised for vocal applications due to the fixed cardioid pattern. The BeesNeez K7 capsule, as is used in the BeesNeez Arabella and Tribute 1, has an almost linear response up to the upper mids, and above 2000Hz there is a slight boost of 2 to 3 dB which then starts to roll off at 17000Hz.
The capsule in the Elly Fet is the BeesNeez K7 cardioid microphone capsule. The K7 capsule has an almost linear response to the upper mids, and above 2000Hz, there is a slight boost of 2 to 3dB, which then starts to roll off at 17000Hz. Our mylar is 6 micron DuPont that’s we framed, sputtered, tuned, and fixed to the backplate all in-house.
The Elly features Beesneez’ proprietry E-Core single-spool transformer. The E-Core transformer in this microphone offers the advantage of a low-leakage transformer and a small physical size. We have also found during testing phases that E-Core transformers such as this one offer a lower susceptibility to core magnetization. When a core becomes magnetized, the lamination permeability is reduced. Many phantom-powered microphones that do not have carefully chosen transformers over the years become magnetized and the functionality of the transformer is drastically reduced.
The Elly body tube is made from a single piece of cold-formed 380 grade brass tube. We love using the 380 grade brass tube in this particular microphone because the high copper content in the 380 tube provides excellent rejection and shielding. After machining the body, it is sent to a local powder coater for completion. The base, like the body tube, is made from 380 grade brass. However, this time it’s a solid brass round that we cut and form in our very own 8-axis CNC turning center. The head grille is integrated in the body tube, by cutting windows into the body tube. Electrically and acoustically, the Elly Fet microphone is of a superior build quality to many microphones made today.
What’s Included:
- Microphone
- Shockmount