United Kingdom

DPA Microphones ST2011A Stereo Mic Matched Pair

£1,560.00 £1,300.00 ex VAT

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.

Delivery time is about 1-3 days.

Free shipping included!

  •  
  •  
  •  
  •  
  •  
  •  

    DPA Microphones ST2011A Stereo Pair Microphone with 2011A Cardioids

      SKU: DPAST2011A Categories: , , , Brand: Brand:

      DPA Microphones ST2011A Stereo Mic Matched Pair

      A complete stereo pair; two handpicked cardioid condenser microphones, selected on sensitivity within ±1.5 dB. Makes several stereo principles like XY and ORTF easy to obtain.

      These mics are acclaimed for their close-miking excellence and hi-SPL handling. Optimized for onstage use, it has been used on many stages as well as recording sessions. They exhibit a previously unheard blend of clarity, richness and dynamic range. The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control.

      The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays.

      The microphone capsule

      Inside this capsule, two opposite-facing miniature capsules are custom rebuilt. They are placed into a double-diaphragm, one-capsule composition. This combines the advantages of small capsules with the lower inherent noise achieved from a larger diaphragm area. These capsules provide fast impulse response and large frequency bandwidth.

      The capsules are loaded to the supreme d:dicate‚Ñ¢ Microphone series preamplifiers instead of the tiny miniature FET ones. This gives the sound more air and precision.

      Comparisons with its big brother, the iconic MMC4011 capsule, are inevitable. The relationship between the two can be clearly heard. The MMC2000 series performs as well as more exclusive microphones. It is a premium-class mic capsule and redefines the term value for money.

      Please read this note about the acoustic center of the d:dicate™ MMC2011 Twin Diaphragm Cardioid Microphone Capsule.

      A truly flexible range

      The d:dicate™ 2011A Twin Diaphragm Cardioid Microphone is part of the flexible d:dicate™ Microphones Series. It combines the d:dicate™ MMC2011 Twin Diaphragm Cardioid Microphone Capsule with the MMP-A preamplifier. This combination is for the true audiophile. It offers low distortion and totally accurate and faithful sound.

      Another option, the d:dicate™ 2011C Twin Diaphragm Cardioid Microphone, Compact offers a subtle character alteration with a bit more “body” to the low end than the d:dicate™ 2011A Twin Diaphragm Cardioid Microphone.

      At any time, and with no tools needed, it is possible to transform the d:dicate™ 2011A Twin Diaphragm Cardioid Microphone into a new configuration. You can combine it with another d:dicate™ or d:facto™ Microphone Capsule or Preamplifier.

      Features

      • Sensitivity-selected pair
      • Blends clarity, richness and dynamics
      • Twin diaphragm capsule and interference tube technologies
      • Superb stage separation and level control
      • Low-profile mounting options
      • Modular flexibility
      • Peli™ Case transportation and protection

      Specifications

      Directional pattern

      Cardioid

      Principle of operation

      Pressure gradient, with interference tube

      Cartridge type

      Pre-polarized condenser, Twin Diaphragm Capsule

      Frequency range

      20 Hz – 20 kHz

      Frequency range, ±2 dB, at 30 cm (11.8 in)

      50 Hz – 17 kHz with 3 dB soft boost at 12 kHz

      Sensitivity, nominal, ±2 dB at 1 kHz

      10 mV/Pa; -40 dB re. 1 V/Pa

      Equivalent noise level, A-weighted

      Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))

      Equivalent noise level, ITU-R BS.468-4

      Typ. 33 dB (max. 36 dB)

      S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)

      Typ. 74 dB(A)

      Total harmonic distortion (THD)

      < 1% up to 137 dB SPL peak

      Dynamic range

      Typ. 117 dB

      Max. SPL, peak before clipping

      153 dB

      Switchable attenuator, filters etc.

      0 dB / -20 dB

      Output impedance

      200 Ω

      Minimum load impedance

      2 kΩ

      Cable drive capability

      100 m (328 ft)

      Output balance principle

      Impedance balancing with Active Drive

      Common mode rejection ratio (CMRR)

      > 60 dB

      Power supply (for full performance)

      48 V Phantom power (± 4 V)

      Current consumption

      2.8 mA

      Connector

      XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase

      Color

      Matte black

      Weight

      164 g (5.8 oz)

      Microphone diameter

      19 mm (0.75 in)

      Microphone length

      198 mm (7.8 in)

      Maximum output voltage, RMS

      > 5 V

      Polarity

      +V at pin 2 for positive sound pressure

      Temperature range

      -40°C to 45°C (-40°F to 113°F)

      Relative humidity (RH)

      Up to 90%

      Contact Us

      Close

      Buy within EU

      Close

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      We know how it feels. You’ve placed your order and are eager to receive your new gear, only to be disappointed by unwelcome import-fees and duty charges. That’s where Funky Junk can help. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers, enabling simpler order fulfilment, faster delivery times and ZERO unexpected fees. This means fewer headaches when calculating costs, no nasty surprises and more importantly, happier clients!

      For more advice on international purchasing with Funky Junk, speak to one of our friendly advisors or email us sales@funky-junk.com

      Based in the EU but concerned about import fees and added charges? We've got you covered. As a pan-European company with multiple locations situated across the UK and EU, we’re able to place stock closer to our European and international customers. Simply switch to the EU store and check-out with your local tax-rate applied. Funky Junk will ship your items from your nearest warehouse for faster delivery times and no cross-border charges. Simple!

      Benefits to shopping with Funky Junk:

      For example: You’d like to purchase VAT-free from the UK? No problem, select the store you want to purchase from, then at checkout pay your local tax-rate (based on you IP location). Funky Junk will then ship your items from your nearest warehouse with stock for faster delivery times and no added charges. Simple!

      For more advise on international purchasing and VAT-related questions you might have, speak to one of our friendly advisors or email

      Got a question? Contact us here: sales@funky-junk.com

      Select your currency