+44 (0) 207 281 4478

Royer Labs RSM-SS24 Sling-Shock™ Microphone shock Mount

£385.00 £320.83 ex VAT

Exports are VAT-free outside the EU or to VAT registered buyers within the EU.

Delivery time is about 1-3 days.

Free shipping on orders over £500!

  •  
  •  
  •  
  •  
  •  
  •  

    The Royer RSM-SS24 Sling-Shot shock mount fits with the Royer SF-2, SF-24 and SF-24V ribbon microphones.

      Royer RSM-SS1 Sling-Shock™ Microphone shock Mount

      The all new Sling-Shock™ (patent pending) is a revolutionary departure from traditional shock mount designs. We’ve done away with the rubberized parts and elastic cords, producing a durable shock mount that gives superior isolation from vibrations.

      In the Royer tradition, the Sling-Shock is hand-built in our Burbank, CA facility using only the finest materials.

      Our proprietary system of non-resonant nylon cable and damped steel springs acts to isolate the microphone from vibrations induced from the microphone stand. These vibrations can appear as rumble and/or low-grade noises which create disturbances across the bandwidth, from low end thumps to harmonic disturbances at different frequencies. The Sling-Shock’s superior vibration-reduction capabilities and lack of self-resonance allow engineers to capture performances free of vibration-related interference across the bandwidth.

      The Sling-Shock Royer RSM-SS1 is sized to fit Royer’s 1-inch diameter R-121, R-122, R-122V, SF-1 and SF-12 ribbon microphones. Any cylindrical microphone measuring approximately one inch in diameter (+/- 1/8 inch) will work with the model RSM-SS1. Future models will accommodate Royer’s larger bodied microphones and microphones of all sizes.

      A European stand-adapter is included where applicaple, allowing the Sling-Shock to be fitted to European specification microphone stands.

      Features:

      • Superior isolation from vibration and shocks
      • Felt-lined, scratch-free microphone chamber holds mic securely
      • No rubberized parts to degrade or stretch
      • Flexible for easy microphone positioning
      • Lifetime warranty

      Microphone Cable Clip and Optional SS-C Vibration Suppression Cable

      Low-level vibrations can be transferred through the mic cable and into the microphone. Incorporated into the sling-shock’s design is a microphone cable clip. This feature is highly effective at further reducing vibrations from being coupled to the microphone through the microphone’s cable.

      Microphone cable clip with strain relief loop.

      If a greater degree of isolation is required, we offer the SS-C Vibration Suppression Cable. This 2-foot (.6 meter) male-XLR-to-female-XLR link cable is comprised of cloth-covered wire and connects between the microphone and the microphone stand, eliminating cable-related vibration when the highest degree of vibration suppression is required.

      Contact Us

      Close
      Select your currency