Barefoot Sound MiniMain 12 with Handles (Pair)
The MiniMain12 is a 4-way active system with 7 drive units housed in sealed enclosures spanning 20Hz to 40kHz with vanishingly low distortion, breathtaking dynamic range and ultra-fast transient response. Every driver has an under-hung voice coil moving inside an advanced geometry motor that enables it make extremely long linear excursions. The ring radiator tweeter is incredibly detailed and produces very wide dispersion out to its highest frequencies. The aluminum cone subwoofers, woofers and midranges radiate as perfect pistons to at least 2.5 octaves beyond their respective bandwidths. Barefoot has teamed up with the brilliant Bruno Putzeys of Hypex to develop the powerful and completely transparent amplifier stage of the MM12. Melding the system together is a groundbreaking DSP crossover that has taken Thomas Barefoot more than 4 years to develop. With beautifully designed high end converts and cutting edge proprietary filtering techniques the MiniMain12 produces such a seamless and coherent wavefront that, if you dare, you can actually listen to this speaker from less than 3 feet away with no sonic compromise. And yes, the MM12 works perfectly out to far field distances as well, producing SPLs equivalent to big mains.
| Description: | 4-way active monitor with Speaker Emulation |
| Controls: | Analog/AES3 input select, AES3 L/R channels select, Input level stepped attenuator, Subwoofer level, Emulation voice select |
| Input Impedance: | 50k Ohm |
| Frequency Response: | 20Hz – 50kHz (±3dB), 28Hz – 40kHz (±1dB) |
| Bass Response: | -3 dB @ 20Hz, Q = 0.707 Slope = 12 dB/octave |
| Cabinet: | 90 liters total internal volume, Sealed sub enclosure, Sealed woofer enclosures, Sealed woofer enclosure, Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout. |
| Crossover Frequencies: | 80 / 800 / 4000 Hz |
| Tweeter: | 1″ ring radiator, Advanced geometry motor, Rear waveguide chamber Amplifier: 250W Hypex |
| Midranges: | 2 x 2.5″ aluminum cones, Advanced geometry motor, +/- 2 mm linear excursion Amplifier: 250W Hypex |
| Woofers: | 2 x 7″ aluminum cones, Advanced geometry motor, +/- 13 mm linear excursion Amplifier: 250W Hypex |
| Subwoofers: | 2 x 12″ aluminum cones, Advanced geometry motor, +/- 25 mm linear excursion Amplifier: 1200W Hypex |
| AC Power Input: | Nominal 115 VAC or 230 VAC selectable |
| Power Consumption: | Idle: 50W, Maximum: 1500W |
| Weight: | Speaker: 120 lbs each (54 kg) – no handles Shipping: 135 lbs each (61 kg) – no handles |
| Dimensions HxWxD: | 26.0 x 14.4 x 21.9 inches (660 x 366 x 556 mm) |