ATC SCM50ASL Pro (Pair) & ATC SCS70 Pro Sub Bundle
ATC SCM50ASL Pro 3-Way Active Monitors (Pair)
I am an unabashed, unashamed, out-of-the-closet fan of ATC, and in particular the SCM50A and SCM110.
Of all the wondrous ATC range, to my ears these monitors are the best balanced, most revealing and most trustworthy for an average to medium room. Maybe it’s the balance of nine inch bass and ATC’s amazing three inch mid that give this system such a natural appeal, or maybe it’s the cabinet design. Whatever the reason, these speakers shine where critical monitoring is a must. OK, so they’re not cheap, but what value do you put on your ears? It’s pointless mortgaging your house for the latest Protools HD rig or a rack of glitzy outboard if you can’t trust your mix. In my book, monitors are the starting point for great recordings, and good monitors don’t come better than these. Come and listen and then dig deep; these monitors are worth every penny.
I’m the kinda guy who likes to share his enthusiasm and spread joy , and to that end until further notice we’ll be offering special deals on the ATC50A’s to help convert the audio world to sonic bliss. We can arrange demos and I’ll wax lyrical about these at the ring of a phone. Call me for our special price and hear happily ever after.
Overview
As multi-channel systems increases in popularity, it is easy to forget that the basic stereo pair of speakers at the front of the listening area remains an essential element.
Existing libraries of recorded music, the commitment of recording companies to stereo in its current form, and the new high resolution digital two-channel formats indicate that stereo will continue to be the main source of recorded music for the foreseeable future.
For these reasons ATC still regards the main stereo speaker pair as the foundation on which a high performance multi-channel system can be built. The new innovative T16 two-way active monitor is an ideal way to establish that foundation.
ATC SCM50ASL Pro
The ATC SCM50ASL Pro is an active 3-way system suitable for reference monitoring in medium sized rooms, with a 234mm Super Linear bass driver and ATC’s unique SM75-150S mid range soft dome driver. The active design ensures optimum matching of six MOS-FET amp blocks to the drivers, providing plenty of transient headroom and maximum SPLs of up to 112dB. An LF contour control provides five bass boost settings and a flat reference response.
Features
- 25mm soft dome tweeter.
- Full “SL” spec 9″/234mm bass driver.
- ATC 75mm “Super Dome” mid driver.
- On board ATC grounded plane 350W Tri-amplifier.
- LF contour control.
- Clip indication.
- 6 year warranty.
Specifications
- Drivers : HF 25mm, Mid 75mm, LF 234mm
- Amplitude Linearity (±2dB) : 70Hz-17kHz
- Cut-off Frequencies (-6dB, free-standing) : 38Hz, 22kHz
- Horizontal Dispersion : ±80°, Coherent
- Vertical Dispersion : ±10°, Coherent
- Max. Continuous SPL (1 metre) : 112dB
- Crossover Frequencies : 380Hz, 3.5kHz
- Input Connectors : Male XLR
- Input Sensitivity : 1V
- Input Sensitivity Trim : ±6dB
- Input Impedance : Balanced > 10kΩ
- Amplifier Output : Bass 200W, Mid 100W, High 50W
- Filters : Even Order Critically Damped
- Overload Protection : Active FET momentary gain reduction plus thermal tweeter protection
- Front Panel Indicators : Power On indicator, Gain Reduction warning
- LF EQ : +6dB @ 40Hz
- Dimensions (HxWxD) : 716 x 351 x 400mm (28.2″ x 13.8″ x 18.8″) Depth with amplifier at rear adds 3″
- Weight : 49kg / 107.8lbs
ATC SCS70 Pro
12”/300mm professional active subwoofer
Overview
The ATC SCS70 Pro is a 12”/300mm active subwoofer, designed to deliver the exceptional levels of performance required by audio and music professionals and integral to partnering with ATCs range of active monitors. It’s performance and features make it ideally suited to stereo, multi-channel surround and immersive audio formats such as Dolby Atmos.
Key Features
- ATC hand-built high-excursion 12”/300mm SS75-314SC subwoofer driver.
- Exceptional balance of high SPL capability, low cut-off and low distortion.
- ATC discrete MOSFET class AB power amplifier.
- Stereo balanced inputs & stereo ‘Link’ balanced outputs.
- Level, Low-Pass Frequency & Phase user controls.
- Remote muting via footswitch. Footswitch supplied separately, latching type, ¼”/6.35mm jack connection.
Acoustic Specifications
Drive Unit – Bass: 1 x SS75-314SC 8Ω.
Low Frequency Cut-off: 22Hz (-6dB, half space, low pass filter set at 80Hz).
Low Pass Filters: 50Hz, 65Hz, 80Hz, 320Hz. (-6dB, 4th order Linkwitz Riley).
MaxSPL: 110dB continuous, 116dB peak (IEC Weighted Pink Noise, 1m, half space, low pass filter @ 80Hz).
Sensitivity: +4dBu ref 88dBC (single channel driven, Gain +6dB, Level 0dB, pink noise, low pass filter @ 80Hz).
Electronic Specifications
Amplifier type: Grounded Source MOSFET based Class A-B, convection cooled.
Output Power: 300W into 8Ω.
THD+N: <0.003%/-90dB, at 100Hz, 300W into 8Ω over 90kHz bandwidth.
Balanced Inputs: 2 x Rear Panel Mounted Female XLR, pin 2 hot.
Balanced Outputs: 2 x Rear Panel Mounted Male XLR, pin 2 hot.
Frequency Response: <2Hz (-3dB) – 320Hz (-6dB, set by panel-controlled LP filter).
Gain Control: 0, +6dB, +10dB.
Level Control: 0dB -11dB in 1dB steps. Total range 21dB with use of Gain switch.
Phase Control: 0-180° ref. Input.
Polarity Control: In-phase/Out-of-phase ref. Input.
Power Consumption: Idle 8W/14VA. 1/8th Power 170W/230VA. Full Power 500W/600VA.
Additional: Mute via ¼”/ 6.35mm Jack soket, controlled via latching footswitch (supplied separately)
Physical Specifications
Dimensions: (H x W x D): 568 x 464 x 500mm / 22 5/16 x 18 1/4 x 19 11/16 inches (heatsink protrudes a further 40mm / 1 9/16 inches from rear). See data sheet for a detailed drawing.
Net Weight: 44kg / 97lbs.