BAE 1023 Single Channel Mic Pre/EQ (No PSU)

BAE 1023 Single Channel Mic Pre/EQ (Requires BAE external PSU)

The BAE 1023 is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.

Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.

Features

• High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.
• Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz.
• Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.
• High Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz & 360Hz.
• EQ Button: Switches the equaliser on or off
• Phase Button: 180°

Requires BAE 24V PSU to operate, sold separately.

The power supply can run 2 units simultaneously thats why units are sold separately as well.

Specifications

Frequency Response

• 10Hz to -3dB at 55kHz

3 Band Equaliser

• • HF:¬†+/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
  • LF:¬†+/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
  • MF:¬†+/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz

High Pass Filter

• • • 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

Mic Input Impedance

• • • ‚âà1200/300 ohms

Line Input Impedance

• • • 10k ohms

DI Input Impedance

• • • ‚âà150k ohms

Output Impedance

• • • 65 ohms

Common Mode Rejection Ratio

• • • 100dB min @ 60Hz

Maximum Output Level

• • • +27.4 dBu @ 600Œ©

Power Requirements

• • • 115/230 VAC, 28W

Gain dB

• • • 0 to 80 dB

Equivalent Input Noise

• • • -110 dBu; Unweighted 300kHz Bandwidth

Weight (Module/Rackmount)

• • • 6 LBS/2.72 KG 10 LBS/4.54 KG

Dimensions in Inches (Module/Rackmount)

• • 45 mm W x 8.75 inches H x 10.5 inches D 19W x 1.75L x 9D