BAE 1028 Mic Pre and EQ Module
The BAE 1028 Module is a mic preamp with 3-band EQ inspired by the legendary BAE 1073 with extensive additional frequencies designed to fit in a Neve 10-series console or Power Supply.
The BAE 1028 Mic Pre and EQ Module uses the exact same mic and line preamp as the BAE 1073 with Carnhill (St Ives) Transformers to give the true vintage tone associated with this legendary preamp.
In addition, the BAE 1028 features no less than 28 frequencies including the same Low pass filter found on the BAE 1084 module. The additional frequencies are located in the mid-bell and high shelf bands with frequencies selected to allow for greater flexibility with the mid bell able to play against the low and high shelves for rich, flexible and musical tonal shaping capabilities.
Features
- High Frequency: +/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz
- Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz.
- Mid Range: +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.
- Low Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz.
- EQ Button: Switches the equaliser on or off
- Phase Button: 180º
Specifications
Frequency Response
- 10Hz to -3dB at 55kHz
3 Band Equaliser
- HF: +/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz
- LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
- MF: +/-18dB +/-12dB or +/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz
High Pass Filter
- 45Hz, 70Hz, 160Hz & 360Hz
Low Pass Filter
- 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, & 18kHz
Mic Input Impedance
- ≈1200/300 ohms
Line Input Impedance
- 10k ohms
DI Input Impedance
- ≈150k ohms
Output Impedance
- 65 ohms
Common Mode Rejection Ratio
- 100dB min @ 60Hz
Maximum Output Level
- +27.4 dBu @ 600Ω
Power Requirements
- 115/230 VAC, 28W
Gain dB
- 0 to 80 dB
Equivalent Input Noise
- -110 dBu; Unweighted 300kHz Bandwidth
Weight (Module/Rackmount)
- 6 LBS / 2.72 KG
- 10 / 4.54 KG
Dimensions in Inches (Module/Rackmount)
- 1.75W x 8.75L x 7.75D
- 19W x 1.75L x 9D