DPA Microphones 4099V Clip Mic For Violin

535,00 438,52+TAV

Les exportations sont exonérées de TVA en dehors de la CEE ou à l'intérieur de la CEE pour les acheteurs possedant un numero de TVA valide.

Délai de livraison environ 7-10 jours.

  •  
  •  
  •  
  •  
  •  

    DPA Microphones 4099V Super Cardioid Clip Microphone For Viola and Violin

      DPA Microphones 4099V Clip Mic For Viola

      • Clean and natural sound
      • Excellent frequency and phase response
      • Compact, discreet size
      • Unique mounting system fits numerous instruments

      The 4099V is a microphone system especially designed to address the unique mounting challenges of slim bodied and unusually shaped instruments. It allows for high quality audio capture while the low profile and light weight of the unobtrusive design provides visual elegance along with uncompromised sound quality.

      The creative design of the unique microphone clip includes a hook-and-loop fastener strap which allows the holder to fit numerous instruments of varying sizes and diameters such as oboe, clarinet, bassoon, recorder and flute. The hook-and-loop fastener band pulls tight to fit the circumference of the instrument, like a wrist watch on your arm. If using the clip on very large diameter instruments, additional hook-and-loop fastener straps can easily be added to extend the clip’s capacity.

      The 4099V includes a revolutionary new “90 degree” system which provides many more mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90 degrees, the number of mic positions is doubled.

      The 4099V includes a 3-pin XLR phantom power adapter. The UC4099 Universal Clip is available separately, and can be used with any of the various versions of the 4099 family.

      The package includes

      • A supercardioid gooseneck mic with cable
      • Integrated windscreen and shock mount system
      • Clip with hook-and-loop fastener to mount on various instruments (also available separately as UC4099)
      • XLR adapter with belt clip

      Specifications

      Directional characteristics: Supercardioid

      Principle of operation: Pressure gradient

      Cartridge type: Pre-polarized condenser

      Frequency range: 20 Hz to 20 kHz

      Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz

      Sensitivity, nominal ± 3 dB at 1 kHz: 2 mV/Pa; -54 dB re. 1 V/Pa

      Equivalent noise level, A-weighted: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))

      S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 66 dB(A)

      Total Harmonic Distortion (THD): Dynamic range: 95 dB

      Max. SPL, peak before clipping: 152 dB

      Output impedance:

      From MicroDot: 30 to 40 ohm; from DAD6001: 100 ohm

      Cable drive capability: Up to 300 m (984 ft) with DAD6001 XLR adapter

      Output balance principle: Signal balanced with DAD6001 XLR adapter

      Common Mode Rejection Ratio (CMRR):> 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter

      Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power +/- 4 V with DAD6001 XLR adapter

      Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR adapter

      Connector: MicroDot

      Color: Black

      Capsule diameter: 5.4 mm (0.2 in)

      Microphone length: 45 mm (1.8 in)

      Cable length: 1.8 m (6 ft)

      Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)

      Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

      Relative Humidity (RH): Up to 90%

      Gooseneck length: 140 mm (5.5 in)

      The proximity effect exhibited by DPA 4099 Typical on- and off-axis frequency response of DPA 4099 at 20 cm (7.9 in) distance changes in specifications if you supply less than 48V Phantom power.

      Contactez-nous

      Fermer