Schoeps CMC 1U

838,99 687,70+TAV

Les exportations sont exonérées de TVA en dehors de la CEE ou à l'intérieur de la CEE pour les acheteurs possedant un numero de TVA valide.

Délai de livraison environ 7-10 jours.

  •  
  •  
  •  
  •  
  •  

    Schoeps CMC 1 U – small Colette microphone amplifier compatible with all components of the Colette system and can be used in place of the CMC 6.

      UGS : SCHP0001 Catégories : , , , Brand: Brand:

      Schoeps CMC 1U – Small Colette microphone amplifier

      The CMC 1 is a small Colette microphone amplifier, about one-third the length and 53% lighter than the CMC 6. It is compatible with all components of the Colette system and can be used in place of the CMC 6 without compromise, for all applications in which the size and weight of the microphone play a role.

      At SCHOEPS, “uncompromising miniaturization” means that the electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6. Through modern electronic design, these outstanding electrical properties have been achieved:

      • high maximum SPL: 135 dB-SPL with the MK 4 (0.5% THD or less)
      • very low current consumption: 2.0 mA at 48 Volts
      • operates on 48 V or 12 V phantom power, reliable operation even if powering is somewhat marginal
      • very high immunity from RF interference with the SCHOEPS RFI Shield; high immunity to cable-induced hum and other interference (field tested with Audio Limited A 10, etc.)
      • flat frequency response
      • very low distortion constant output impedance across the audio frequency range
      • balanced, direct-coupled, class-A output circuit
      • output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

      A complete Colette-series microphone consists of an MK capsule and a CMC amplifier. All capsules and active accessories of the Colette system are compatible with the CMC 1.

      The CMC 1 works with standard 12-Volt or 48-Volt phantom powering. Power consumption is lower at 12 Volts–an advantage for battery-powered operation.

      TECHNICAL SPECIFICATIONS

      • Frequency range: 20 Hz-20 kHz
      • Sensitivity: see corresponding capsule
      • Maximum output voltage: 1.8 V (5 dbV) with 1 kΩ load
      • Maximum sound pressure level (THD < 0.5 %):
        • 135 dB-SPL (P48) with MK 4
        • 131 dB-SPL (P12) with MK 4
      • Low cut filter: 20 Hz, 12 dB/oct
      • Output impedance: 50 Ω +/- 1 Ω (8 Hz – 50 kHz)
      • Minimum recommended load impedance: 1 kΩ
      • Common mode rejection ratio (at 1 kHz): > 55 dB
      • Maximum cable length: > 400 m (~1,300 ft)
      • SCHOEPS RFI Shield: Yes
      • Powering standard / Valid range:
        • P48 / 30-52 V
        • P12 / 11-13 V
      • Current consumption:
        • 2 mA (P48)
        • 3 mA (P12)
      • Output: XLR-3M, analog, 1 channel
      • Length: 36 mm / ~1.4″
      • Diameter: 20 mm / 0.8″
      • Weight: 36 g / 1.3 oz
      • Surface finish: matte gray
      • Custom color: nickel, chromagreen

      Contactez-nous

      Fermer