DPA Microphones MMP-C Compact Preamp
Ultra-compact preamp with active drive for impedance balancing.
Has a slightly more musical and slightly softer character than the other preamps in the DPA Reference Standard series.
Combine this preamp with any capsule in the series.
Specifications
- Output connector:_x0009_XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
- Low-cut frequency, -3 dB:_x0009_15 Hz
- Noise with shorted input, A-weighted:_x0009_0.6 µV
- Output voltage, RMS:_x0009_> 4 V
- Output voltage, peak:_x0009_> 5.6 V
- Type of electronic circuit:_x0009_Active
- THD@1VRMS, 1kHz:_x0009_< 0.2 %
- Dynamic range:_x0009_136 dB
- Output impedance:_x0009_< 200 ohm
- Output balance principle:_x0009_Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR):_x0009_> 50 dB
- Power supply (for full specifications):_x0009_48 V Phantom power (± 4 V)
- Current consumption:_x0009_2.8 mA
- Color:_x0009_Matte black
- Weight:_x0009_40 g (1.4 oz)
- Diameter:_x0009_19 mm (0.75 in)
- Length:_x0009_41 mm (1.6 in)
- Cable drive capability:_x0009_100 m (328 ft)
- Temperature range:_x0009_-40 °C to 45 °C (-40 °F to 113 °F)
- Relative Humidity (RH):_x0009_Up to 90 %